Installation guide

130 Chapter 8:Cluster Administration
Table 8–2 Power Switch Status
Power Switch
Status
Description
OK
The power switch is operating properly.
Wrn
Could not obtain power switch status.
Err
A failure or error has occurred.
Good
The power switch is operating properly.
Unknown
The other cluster member is DOWN.
Timeout
The power switch is not responding to power daemon commands,
possibly because of a disconnected serial cable.
Error
A failure or error has occurred.
None
The cluster configuration does not include power switches.
Initializing
The switch is in the process of being initialized and its definitive status
has not been concluded.
Table 8–3 Heartbeat Channel Status
Heartbeat Channel
Status
Description
OK
The heartbeat channel is operating properly.
Wrn
Could not obtain channel status.
Err
A failure or error has occurred.
ONLINE
The heartbeat channel is operating properly.
OFFLINE
The other cluster member appears to be UP, but it is not responding to
heartbeat requests on this channel.
UNKNOWN
Could not obtain the status of the other cluster member system over this
channel, possibly because the system is
DOWN or the cluster daemons
are not running.