Installation guide

118 Chapter 6:Network File Sharing Services
Service name: samba_acct
Preferred member [None]: clu4
Relocate when the preferred member joins the cluster (yes/no/?) [no]: yes
User script (e.g., /usr/foo/script or None) [None]:
Status check interval [0]: 90
Do you want to add an IP address to the service (yes/no/?) [no]: yes
IP Address Information
IP address: 10.0.0.10
Netmask (e.g. 255.255.255.0 or None) [None]:
Broadcast (e.g. X.Y.Z.255 or None) [None]:
Do you want to (a)dd, (m)odify, (d)elete or (s)how an IP address, or
are you (f)inished adding IP addresses [f]:
Do you want to add a disk device to the service (yes/no/?) [no]: yes
Disk Device Information
Device special file (e.g., /dev/sdb4): /dev/sdb12
Filesystem type (e.g., ext2, ext3 or None): ext2
Mount point (e.g., /usr/mnt/service1) [None]: /mnt/users/accounting
Mount options (e.g., rw,nosuid,sync): rw,nosuid,sync
Forced unmount support (yes/no/?) [yes]:
Would you like to allow NFS access to this filesystem (yes/no/?)\
[no]: no
Would you like to share to Windows clients (yes/no/?) [no]: yes
You will now be prompted for the Samba configuration:
Samba share name: acct
The samba config file /etc/samba/smb.conf.acct does not exist.
Would you like a default config file created (yes/no/?) [no]: yes
Successfully created daemon lock directory /var/cache/samba/acct.
Please run ‘mkdir /var/cache/samba/acct‘ on the other cluster member.
Successfully created /etc/samba/smb.conf.acct.
Please remember to make necessary customizations and then copy the file
over to the other cluster member.
Do you want to (a)dd, (m)odify, (d)elete or (s)how DEVICES, or
are you (f)inished adding DEVICES [f]: f
name: samba_acct
preferred node: clu4