User`s guide

5-52
Basic Configuration
5.9.8.2 ViewingLDAPGroups
If you need to examine an existing LDAP group definition, the "View LDAP Groups"
function can be used to review the group's parameters and Plug Access Settings.
5.9.8.3. ModifyingLDAPGroups
If you want to modify an existing LDAP Group in order to change parameters or
plug access rights, the "Modify LDAP Group" function can be used to reconfigure
group parameters. To Modify an existing LDAP Group, you must access the VMR/
NPS command mode using a password that permits access to Administrator Level
commands. Once you have accessed the Modify LDAP Group menu, use the menu
options to redefine parameters in the same manner that is used for the Add LDAP Group
menu, as discussed in Section 5.9.8.1.
Note: After you have finished modifying LDAP Group parameters, make certain
to save the changes before proceeding. In the Web Browser Interface, click
on the "Modify LDAP Group" button to save parameters; in the Text Interface,
press the [Esc] key several times until the VMR/NPS displays the "Saving
Configuration" message and the cursor returns to the command prompt.
5.9.8.4. DeletingLDAPGroups
The Delete LDAP Group function is used to delete LDAP Groups that are no longer
in use. In order to Delete an existing LDAP Group, you must access the VMR/
NPS command mode using a password that permits access to Administrator Level
commands.
5.9.9. TACACS Parameters
The TACACS Configuration Menus offer the following options:
• Enable: Enables/disables the TACACS feature at the Network Port. (Default = Off)
• PrimaryAddress: Defines the IP address or domain name (up to 64 characters)
for your primary TACACS server. (Default = undefined)
• SecondaryAddress: Defines the IP address or domain name (up to 64 characters)
for your secondary, fallback TACACS server (if present.) (Default = undefined)
• SecretWord: Defines the shared TACACS Secret Word for both TACACS servers.
(Default = undefined.
• FallbackTimer: Determines how long the VMR/NPS will continue to attempt to
contact the primary TACACS Server before falling back to the secondary TACACS
Server. (Default = 15 Seconds)