User`s guide

5-8
Basic Configuration
• ManagementUtility: Enables/Disables the Enterprise Management Utility (WMU.)
When enabled, the WMU allows you to manage multiple WTI units via a single
menu. (Default = Off.) For more information on the WMU, please refer to the WMU
User's Guide, which can be found on the WTI website at:
http://www.wti.com/t-product-manuals.aspx
Note: Although the Enterprise Management Utility can be enabled/disabled via
either the Web Browser Interface and Text Interface, the Management Utility can
only be accessed and operated via the Web Browser Interface.
• ScriptingOptions: Provides access to parameters that are used to set up the
VRM/NPS unit for running various scripts as described in Section 5.3.6.
Note: In the Text Interface, the Scripting Options submenu is accessed via
item 12. To access the Scripting Options parameters via the Web Browser
Interface, place the cursor over the "General Parameters" link, wait for the flyout
menu to appear, then click on the "Scripting Options" link.
• PowerConfiguration: (VMR Only) In the Web Browser Interface, the Voltage
Calibration parameter, Power Factor parameter and Power Efficiency parameter are
defined via the System Parameters Menu. In the Text Interface, these parameters
reside in a separate submenu, which is accessed via the Power Configuration
option. For more information on Power Configuration, please refer to Section 5.3.5.
Note: The Power Configuration option is not available on NPS units.
• EnergyWiseConfiguration: Defines parameters that are needed in order for the
VMR or NPS to serve as an element in a Cisco
®
EnergyWise™ network. This item
allows the following parameters to be defined. (Default = Off.)
Note: In the Web Browser Interface, EnergyWise parameters are defined via
the "EnergyWise" link in the General Parameters fly-out menu.

Enable: Enables/disables the VMR/NPS unit's ability to particapate in a Cisco
Energywise network. (Default = Off)

Domain: The Energywise Domain Name; up to eighty characters long.
(Default = Undefined.)

Secret: A password that is used to authenticate each element in a Cisco
Energywise network. The Secret parameter can be up to eighty characters long.
(Default = Undefined.)
• AssetTag: Allows a descriptive tag or tracking number to be assigned to the
VMR/NPS unit. Once defined, the Asset Tag can be displayed via the Product
Status Screen in the Web Interface or via the /J* command in the Text Interface.
(Default = Undefined)