User`s guide

17-15
Command Reference Guide
/N Network Port Parameters - IPv4
Displays a menu which is used to select IPv4 parameters for the Network Port. Note
that all functions provided by the /N command are also available via the Web Browser
Interface. For more information, please refer to Section 5.9.
Availability: Administrator
Format: /N [Enter]
/N6 Network Port Parameters - IPv6
Displays a menu used to select IPv6 protocol parameters for the Network Port. All
functions provided by the /N6 command are also available via the Web Browser
Interface. For more information, please refer to Section 5.9.
Availability: Administrator
Format: /N6 [Enter]
/RB Reboot Options
Displays a menu that is used to configure Scheduled Reboots and Ping-No-Answer
Reboots. The Scheduled Reboot function can be used to reboot devices connected to
the VMR/NPS's switched outlets according to a user-defined schedule. The Ping-No-
Answer Reboot function allows the VMR/NPS to automatically reboot user-designated
outlets when a user-specified IP address does not respond to a Ping command. For
more information on Reboot options, please refer to Section 6.
Note: If desired, the Ping-No-Answer Reboot function can also be configured
to send email notification whenever a Ping-No-Answer Reboot is generated. For
more information, please refer to Section 7.5.
Availability: Administrator
Format: /RB [Enter]
/AC Alarm Configuration Parameters
Displays a menu that is used to configure and enable the VMR/NPS unit's monitoring
and alarm functions. For more information on Alarm Configuration, please refer to
Section 7.
Note: Current and Power Metering functions are not available on NPS units.
Availability: Administrator
Format: /AC [Enter]