User`s guide

16-3
Upgrading VMR/NPS Firmware
8. If you have accessed the VMR/NPS via the Network Port, in order to start the FTP/
SFTP servers, the VMR/NPS will break the network connection when the system is
reinitialized.
• If you initially selected "Start FTP/SFTP Servers and Save Parameters", you may
then reestablish a connection with the VMR/NPS using your former IP address.
• If you initially selected "Start FTP/SFTP Servers and Default Parameters",
you must then login using the VMR/NPS’s default IP address (Default =
192.168.168.168) or access command mode via Serial Port 1 or 2 or via Modem.
When firmware upgrades are available, WTI will provide the necessary files. At that time,
an updated Users Guide or addendum will also be available.