User`s guide

13-9
Operation via SNMP
• powercycleSetTrap - Indicates that the Power Cycle Alarm has been triggered
(Note that there is no corresponding Clear Trap for the Power Cycle Alarm.)
• plugCurrentSetTrap - (VMR Series Units Only) Indicates that the Plug Current
Alarm has been triggered.
• plugCurrentClearTrap - (VMR Series Units Only) Indicates that the Plug
Current Alarm has been Cleared.
• lostCommSetTrap - Indicates that the Lost Communication Alarm has been
triggered.
• lostCommClearTrap - Indicates that the Lost Communication Alarm has been
cleared.
• plugCurrentSetTrap - Indicates that the Plug Current Alarm has been triggered.
• plugCurrentClearTrap - Indicates that the Plug Current Alarm has been
cleared.
• lostOptoVoltageSetTrap - Indicates that the Lost Voltage Alarm has been
triggered at a unit that includes opto sensors.
• lostOptoVoltageClearTrap - Indicates that the Lost Voltage Alarm has been
cleared at a unit that includes opto sensors.
• noDialtoneSetTrap - Indicates that the No Dialtone Alarm has been triggered.
• noDialtoneClearTrap - Indicates that the No Dialtone Alarm has been cleared.
• emergencyShutoffSetTrap - Indicates that an emergency shut off has been
implemented. For more information regarding the Emergency Shut Off feature,
please contact WTI Tech Support at [e-mail].
• emergencyShutoffClearTrap - Indicates that an emergency shut off has been
cleared. For more information regarding the Emergency Shut Off feature, please
contact WTI Tech Support at [e-mail].