User`s guide

9-8
Operation
9.4.2. Initiating a Telnet Session via the Web Browser Interface
To initiate a Telnet Session from the VMR/NPS Web Browser Interface, proceed as
follows:
1. Place the cursor over the "SSH/Telnet Connect" button on the left hand side of the
screen. When the flyout menu appears, click on the Telnet option.
Note: If the RSP displays a message that indicates that your browser does not
include the Java plugin, go to the Java website and download the latest version
of the Java plugin.
2. Log in to the Telnet Session:
a) The VMR/NPS will display the "login" prompt. Key in a valid username that
has been previously defined via the VMR/NPS User directory and then press
[Enter].
b) The VMR/NPS will display the "password" prompt. Key in the valid password
for the username entered above and then press [Enter].
Notes:
• The username entered must be a valid username that has been previously
defined via the VMR/NPS User Directory as described in Section 5.5.
• The IP Address (host name) can either be the address to the machine that
you are currently communicating with via the Web Browser Interface, or
you can enter the IP address for another VMR/NPS unit, providing that the
username entered is present on the other VMR/NPS unit too.
3. The VMR/NPS will display the Circuit Status Screen, followed by the command
prompt. You may now invoke VMR/NPS commands as descrived in Section 9.2
and 17.
4. To terminate the Telnet Session, type /X and press [Enter].