User`s guide

8-8
The Status Screens
8.9. The Port Diagnostics Screen
The Port Diagnostics Screen provides more detailed information about the VMR/NPS's
Serial Port. To display the Port Diagnostics Screen, access the Text Interface command
mode and type /SD [Enter].
Note: The Port Diagnostics Screen is only available via the Text Interface.
8.10. Alias Status Screen
The Alias Status Screen lists user defined IP alias for the VMR/NPS's Serial Port.
Note: The Alias Status Screen is only available via the Text Interface.
To display the Alias Status Screen via the Text Interface, type /SA and press [Enter].
8.11. The Alarm Status Screen
The Alarm Status Screen lists all available user-defined alarms and indicates whether
or not each alarm has been triggered. The resulting screen will display "Yes" (or 1) for
alarms that have been triggered or "No" (or 0) for alarms that have not been triggered.
If desired, the /AS command line can also include an optional alarm argument that
will cause the unit to display the status of one individual alarm. For a list of alarm
arguments, please refer to Section 17.3.1.
8.12. The Serial Port Parameters Screen
The /W (Who) command displays more detailed information about the VMR/NPS's Serial
Port. Rather than listing general connection information, the Port Parameters screen
lists all defined parameters for the Serial port. To display the Serial Port Parameters
Screen, type /W and press [Enter].
The /W command uses the following format:
/W xx [Enter]
Note: The Serial Port Parameters screen is only available via the Text Interface.