User`s guide

8-3
The Status Screens
8.4. The Plug Group Status Screen
The Plug Group Status screen shows the configuration details and On/Off status for the
VMR/NPS's user-defined Plug Groups.
Notes:
• Current and Power Monitoring features are not available on NPS units.
• When the Plug Group Status Screen is viewed by an "Administrator" or
"SuperUser" level account, all VMR/NPS plugs and plug groups are listed.
When the Plug Status Screen is viewed by a "User" or "ViewOnly" level
account, the screen will list only the plug groups that are allowed by that
account.
• In order to display the Plug Group Status screen, you must first define at least
one Plug Group as described in Section 5.6.
To display the Plug Group Status Screen via the Text Interface, type /SG and then
press [Enter]. To display the Plug Group Status Screen via the Web Browser Interface,
click on the "Plug Group Status" link and then select the desired Plug Group from the
resulting subment and click on the "Get Plug Group Status" button.
Note: The SNMP Index item (Text Interface Only) lists the permanent reference
number that the VMR/NPS assigns to each Plug Group. The SNMP Index
number allows MIB commands to be addressed to a specific Plug Group. The
SNMP Index number will not change when other Plug Groups are deleted or
created.