User`s guide

8-2
The Status Screens
8.3. The Plug Status Screen
The Plug Status screen shows the On/Off status of the VMR/NPS's switched outlets.
Note:
• When the Plug Status Screen is viewed by an "Administrator" or "SuperUser"
level account, all VMR/NPS plugs are listed. When the Plug Status Screen is
viewed by a "User" or "ViewOnly" level account, the screen will list only the
outlets that are allowed by that account.
• Section 5.7 describes the procedure for configuring the plug parameters that
are listed in the Plug Status Screen.
To display the Plug Status Screen via the Text Interface, type /S and press [Enter]. To
display the Plug Status Screen via the Web Browser Interface, click on the "Plug Status"
link. Note that when the /S command is invoked via the Text Interface, the command
line can also include arguments that display On/Off status for an individual outlet, two or
more specific outlets, or a range of outlets:
/S Displays configuration details and ON/Off status for all switched outlets.
/S s Displays On/Off status for an individual outlet, where s is the name or
number of the desired outlet.
/S s+s Displays On/Off status for two or more specific outlets, where s is the
number or name of each desired outlet. A plus sign (+) is entered between
each outlet number or name.
/S s:s Displays On/Off status for a range of outlets, where s is the number or name
of the outlet at the beginning and end of the range of desired outlets. A
colon (:) is entered between the two outlet numbers or names that mark the
beginning of the range and the end of the range.