Specifications
NANOTRONIX
P.32
TO place an order call (852) 2408 8880
Wardson Limited
Unit A & B, 21/F., Infotech Centre, No. 21 Hung To Road Kwun Tong, Kowloon, Hong Kong. Web: www.wardsonlimited.com
Tel: (852) 2408 8880 Fax: (852) 2408 9688 E-mail: info@wardsonlimited.com
Specifications
Optitical specificicatitions Dynamic range 20dB
(OTDR mode)(OTDR mode) Wavelength 1310/1550nm
Fiber type Single-mode
Connector type FC/PC or SC/PC
Minimum display resolution 10cm
Max. measurement range 100km
Pulse width 50ns, 100ns, 200ns, 500ns, 1 , 2 , 5 , 10
Average time 15s, 30s, 1min, 2min, 3min
Attenuation deadzone 30m
Event deadzone 15m
Distance accuracy 10cm 0.1% of reading < 100m
0.1% of reading >100m
Reflection detect accuracy 4dB
Attenuation detect accuracy 0.1dB
Measurement data storage 50 curves
IOR setting 1.0000 ~ 1.9999 (in 0.0001 step)
MetallicMetallic Measurement range Coax. : 3.2m ~ 20,000m (10.4ft ~ 65,000ft)
specificicatitions *Maximum testable cable length will vary with pulse width and cable type
(MTDR mode) Maximum display resolution 10cm (Variable up to 50m)
(MTDR mode) Accuracy 0.1m 0.01% of reading for Coax.
*Accuracy will vary with VOP of cable being tested
Test mode L1, L1&M, L1-M, M
Pulse width 5ns, 15ns, 45ns, 100ns, 200ns, 500ns, 1 , 2 , 5 , 10
Maximum storage capacity 100 waveforms
Output impedance Automatic output impedance control of 25, 50, 75, 100, 125, 150
Input bandwidth 300MHz
Effective sampling rate 1GS/s
Gain 0 to 66dB or better, maximum sensitivity 1mV (full scale)
Screen update rate Maximum 3 times per second
VOP (PVF) Variable from 30.0 to 99.9% (in 0.1% step)
V:90 to 300m/
V/2:45 to 150m/
Connector BNC female
General Display type 6.4" Color TFT LCD
specificationsGeneral Internal memory 2MB
specifications Communication port RS-232C compatible (1 start bit, 8 data bits,1 stop bit and no parity
and 38, 400 baud rate)
Power supply 7.6V Li-ion chargeable battery pack 8800mAh / AC adapter
Battery life 7 hours (extendable up to 14 hours by using extra spare battery)
Recharge time 6 hours
Adaptor input Voltage : AC 110 ~ 240V (auto adjusting)
Frequency : 50/60Hz (auto adjusting)
Adaptor output Voltage : DC 14V (+5%)
Currency : Max.1A
Operating temperature -15
.
C~ +50
.
C
Storage temperature -20
.
C ~ +70
.
C
Relative humidity < 95%
Weight 2.7kg
Dimensions (H x W x T) 247mm(9.7") x 267mm(10.5") x 127mm(5")
DT-Combined Optical / Metalic Time Domain Reflectometer (TDR)
Combi TDR for optic &
Metalic cables