Specifications

P.01
RSM-16
RSM-32
RSM-8
WTI
TO place an order call (852) 2408 8880
Wardson Limited
Unit A & B, 21/F., Infotech Centre, No. 21 Hung To Road Kwun Tong, Kowloon, Hong Kong. Web: www.wardsonlimited.com
Tel: [phone] Fax: [phone] E-mail: [e-mail]
Model
Part # Description
RSM-8 SSHv2 Remote Site Manager with Internal Modem, 8-Port, SSHv2, Telnet,
RS-232, 100/240V AC
RSM-16 SSHv2 Remote Site Manager with Internal Modem, 16-Port, SSHv2, Telnet,
RS-232, 100/240V AC
RSM-16DC SSHv2 Remote Site Manager with Internal Modem, 16-Port, SSHv2, Telnet,
RS-232, -48V DC
RSM-32 SSHv2 Remote Site Manager with Internal Modem, 32-Port, SSHv2, Telnet,
RS-232, 100/240V AC
RSM-32DC SSHv2 Remote Site Manager with Internal Modem, 32-Port, SSHv2, Telnet,
RS-232, -48V DC
RSM-23R 23" Rack Adapter Kit for RSM Series Units
NETREACH
TM
Remote
Network Management
SSHv2 Secure Console Switch with Internal Modem
Description
Applications
n Local or Remote Console Port Switching
n UNIX Serial Console Management
n TCP/IP, Dial-Up, SSH or Telnet Access to Consoles at Remote Locations
n Share Multiple Console Ports Using a Single VT100 Terminal or PC
n In-Band/Out-of-Band Network Management
The RSM Series Secure Consle Switches provide in-band and out-of-band access to RS-
232 console ports and maintenance ports over network via SSH connections and simple
menu-driven commands, or through a discrete TCP port connection mapped directly to
one of the RSM's eight or sixteen serial outputs.
The RSM can also send buffered console messages via SYSLOG, as well as alert via
SNMP when incoming console messages are captured. The RSM is ideal for allowing
administrators to buffer console date collected in the RSM during non-connect periods,
and/or to access console ports through out-of-band connections.
Intelligent Port Selection
Each port can be individually accessed by number, name or group via standard SSH
sessions. The RSM alsoallows direct connections through discrete TCP port assignments
mapped directly to a specified serial output. Ports can be individually control and many
other operating parameters. The full matrix capability of the RSM allows any port to connect
to any other port on the switch. Ports can also be connected or disconnected by a third
party with supervisor rights. Configuration and Status screens display realtime port statistics
and activity for one or all ports.
Data Capture Buffer
The "Buffer Mode" feature allows individual ports to capture and store incoming data. This
"snapshot" of the last 256K of received data is stored in memory, and can be viewed,
saved or erased by the systems operator at any time. Console messages, which are stored
in the RSM port buffers, can be sent to a remote location via SYSLOG, or an SNMP trap
can be generated to alert administrators when new console messages have been recorded.
This is particularly useful in the event that "alarm error" or other critical data is sent from
a specific console port during non-connect periods.