Specifications

P.17
WTI
TO place an order call (852) 2408 8880
Wardson Limited
Unit A & B, 21/F., Infotech Centre, No. 21 Hung To Road Kwun Tong, Kowloon, Hong Kong. Web: www.wardsonlimited.com
Tel: [phone] Fax: [phone] E-mail: [e-mail]
NETREACH
TM
Remote
Network Management
Web Browser Based "Zero U" Power Reboot Bar
Description
Applications
n Remote Power Management and Control
n Reboot Servers, Routers, Web Cams, Firewalls and Other Remote Devices
Servers, routers, and other electronic equipment sometimes "lock-up," often requiring a
service call to a remote site just to flip the power switch to perform a simple reboot. The
NBB-230 Network Boot Bar gives you the ability to perform this function from anywhere;
just point your browser to the NBB-230's IP address, enter the secure password, and
you're just a click away from remote power control.
Two Convenient User Interfaces
The NBB-230 provides two convenient methods for accessing configuration and switching
functions; The Web Browser Interface and the Command Line Interface. The Web Browser
Interface consists of a series of simple, easy-to-use web page menus that allow you to
select configuration parameters or initiate switching operations using your TCP/IP network
and a JavaScript enabled web browser. The Command Line Interface is an ASCII command
line menu system, which allows you to configure and operate the NBB-230 via Telnet over
TCP/IP network, via modem connection, or via local PC using a terminal program such
as Hyperterminal or TeraTerm.
Security Features
Access to the NBB-230 command mode is password protected to prevent unauthorized
users from gaining access to sensitive switching and configuration functions. Both the
Web Browser Interface and Command Line Interface require the user to enter a password
before allowing access.
Passwords transmitted via web browser use basic , 64 bit encryption techniques to ensure
that passwords remain protected, and access to your equipment remains secure. Telnet
Control can be defined to a discrete TCP port, or turned off to ensure that no unprotected
port is present.
Easy to Configure, Easy to Use
The NBB features two different levels of operational passwords: the System Administrator
Level and the User Level. The System Level provides access to all configuration and
switching functions, while the User Level is limited to switching functions only, and can
be restricted to specific plugs based on the password entered at log in.
Easy to use commands let you assign Plug names, set system parameters and view plug
status. Outlets can be switched On, Off or Booted using plug numbers or names. For
Power Sequencing, each plug can be assigned a power-up time value, and will wait for
the selected duration before applying power to the next plug.
Control Power on Any AC
Powered Device ...
Via Web Browser, Telnet,
Modem or Local Terminal !
Model
Part # Description
NBB-115 Single 15 - Amp Input, 120V AC, 5 - Outlets, NEMA 5 -15
NBB-230 Single 15 - Amp Input, 230V AC, 5 - Outlets, IEC320 - C13
NBB-230