Specifications

P15
WTI
TO place an order call (852) 2408 8880
Wardson Limited
Unit A & B, 21/F., Infotech Centre, No. 21 Hung To Road Kwun Tong, Kowloon, Hong Kong. Web: www.wardsonlimited.com
Tel: [phone] Fax: [phone] E-mail: [e-mail]
NETREACH
TM
Remote
Network Management
NBB Series Network Boot Bars for Remote Power Management (Vertical)
Output Dual Total Input
Model
Receptacles
Voltage
Output Output Panel
Regulatory
NBB-1600 (16)NEMA 5-15R 120V 15 Amps 30 Amps IEC320-C14 UL
NBB-1600-D20 (16)NEMA 5-15R 120V 20 Amps 430 Amps IEC320-C20 UL
NBB-1600E-D20 (16)IEC320-C13 208V 20 Amps 40 Amps IEC320-C20 UL
NBB-1600-CE (16)IEC320-C13 230V 10 Amps 20 Amps IEC320-C14 CE
NBB-1600CE-D16 (16)IEC320-C13 230V 16 Amps 32 Amps IEC320-C20 CE
Description
Applications
n Control Power on any 120, 208, or 230 VAC Powered Device via Internet, Web Browser,
Telnet, Modem or Local Terminal
n Remote Power Management and Control
n Reboot Servers, Routers, Web Cams, Firewalls and Other Remote Devices
NBB Series
Servers, routers, and other electronic equipment sometimes "lock-up," often requiring a service call
to a remote site just to flip the power switch to perform a simple reboot. NBB-Series Remote Power
Management Switches give you the ability to perform this function from anywhere; just point your
browser to the IP address of any IPS-Series unit, enter the secure user name and password, and
you're just a click away from remote power On, Off or Reboot!
Two Convenient User Interfaces
The IPS provides two convenient methods for accessing configuration and switching functions; The
Web Browser Interface and the Command Line Interface.
The Web Browser Interface consists of a series of simple, easy-to-use web page menus that allow
you to select configuration parameters or initiate switching operations using your TCP/IP network
and a JavaScript enabled web browser.
The Command Line Interface is an ASCII menu system, which allows you to configure and operate
the IPS via telnet over TCP/IP network, via modem connection or via local PC using a terminal
program such as Hyperterminal or TeraTerm.
Security and Co-Location Features
Access to the IPS command mode is password protected to prevent unauthorized users from invoking
sensitive switching and configuration functions. Both the Web Browser Interface and Command Line
Interface require the user to enter a password before allowing access. Telnet control can be user-
defined to a discrete TCP port, or completely turned off to ensure that no unprotected port is present.
The IPS also features two different levels of operational passwords; the System Administrator Level
and the User Level. The System Level provides access to all configuration and switching functions,
while the User Level is limited to switching functions only. Each outlet can have a unique User Level
password, and each user can either be allowed to control all plugs, or restricted to specific plugs
selected by the Administrator.
Easy to Configure, Easy to Use
The IPS can be configured via network, via modem, or locally via the serial console port. Easy to
master, user-friendly menus and commands let you assign a location name, set system parameters
and view plug status. Outlets can be switched on, off, rebooted or set to user-defined default status
using plug numbers or names.
Reliability and Support
The IPS is built in the USA and backed by a five year warranty. NetReach products are installed in
thousands of network sites world wide. Our customers know they can depend on WTI for superior
quality and reliability for their most mission-critical operations.
Features
n Dual Power Circuits: Up to 20 Amp
Models Total Up to 40-Amps Maximum
Load
n 8 or 16 Individual Switched Outlets
n Web Browser Access for Easy Setup
and Operation
n On / Off / Reboot / Default Switching
n User-Defined Power-Up Default Status
n IP Addressed, 10Base-T Interface
n RS232 Modem / Console Port
n Network Security Features
n Power-Up Sequencing
n Manual Power Control Button
n Various Input Cable Styles Available
- Order Separately
Safety Retainer
Design