Specifications

P.11
TO place an order call (852) 2408 8880
Wardson Limited
Unit A & B, 21/F., Infotech Centre, No. 21 Hung To Road Kwun Tong, Kowloon, Hong Kong. Web: www.wardsonlimited.com
Tel: [phone] Fax: [phone] E-mail: [e-mail]
WTI
NETREACH
TM
Remote
Network Management
IPS Series Internet Power Switches for
Remote Power Management (Horizontal)
Features
n Dual Power Circuits: Up to 20 Amp Models
Total Up to 40-Amps Maximum Load
n 8 or 16 Individual Switched Outlets
n Web Browser Access for Easy Setup and
Operation
n On / Off / Reboot / Default Switching
n User-Defined Power-Up Default Status
n IP Addressed, 10Base-T Interface
n RS232 Modem / Console Port
n Network Security Features
n Power-Up Sequencing
n Manual Power Control Button
n Various Input Cable Styles Available - Order
Separately
Description
Applications
n Control Power on any 120, 208, or 230 VAC Powered Device via Internet, Web Browser,
Telnet, Modem or Local Terminal
n Remote Power Management and Control
n Reboot Servers, Routers, Web Cams, Firewalls and Other Remote Devicesl
IPS Series
Servers, routers, and other electronic equipment sometimes "lock-up," often requiring a
service call to a remote site just to flip the power switch to perform a simple reboot. IPS-
Series Remote Power Management Switches give you the ability to perform this function
from anywhere; just point your browser to the IP address of any IPS-Series unit, enter
the secure user name and password, and you're just a click away from remote power
On, Off or Reboot!
Two Convenient User Interfaces
The IPS provides two convenient methods for accessing configuration and switching
functions; The Web Browser Interface and the Command Line Interface.
The Web Browser Interface consists of a series of simple, easy-to-use web page menus
that allow you to select configuration parameters or initiate switching operations using
your TCP/IP network and a JavaScript enabled web browser.
The Command Line Interface is an ASCII menu system, which allows you to configure
and operate the IPS via telnet over TCP/IP network, via modem connection or via local
PC using a terminal program such as Hyperterminal or TeraTerm.
Security and Co-Location Features
Access to the IPS command mode is password protected to prevent unauthorized users
from invoking sensitive switching and configuration functions. Both the Web Browser
Interface and Command Line Interface require the user to enter a password before allowing
access. Telnet control can be user-defined to a discrete TCP port, or completely turned
off to ensure that no unprotected port is present.
The IPS also features two different levels of operational passwords; the System Administrator
Level and the User Level. The System Level provides access to all configuration and
switching functions, while the User Level is limited to switching functions only. Each outlet
can have a unique User Level password, and each user can either be allowed to control
all plugs, or restricted to specific plugs selected by the Administrator.
Easy to Configure, Easy to Use
The IPS can be configured via network, via modem, or locally via the serial console port.
Easy to master, user-friendly menus and commands let you assign a location name, set
system parameters and view plug status. Outlets can be switched on, off, rebooted or
set to user-defined default status using plug numbers or names.
Reliability and Support
The IPS is built in the USA and backed by a five year warranty. NetReach products are
installed in thousands of network sites world wide. Our customers know they can depend
on WTI for superior quality and reliability for their most mission-critical operations.