User`s guide

RS232 Ports 2-2, 5-8 to 5-11, 11-8
Accept Break 5-13
Baud Rate 5-9
Bits and Parity 5-9
Command Echo 5-13
DCD and DTR Signals 5-10, Apx-1
DTR Output 5-10
Handshake Mode 5-9
Interface Apx-1
Logoff Character 5-11
Modem Hang-Up String 5-11
Modem Init. String 5-10
Modem Reset String 5-10
Port Mode 5-9
Port Name 5-9
Port Password 5-9
Response Type 5-13
Sequence Disconnect 5-12
Stop Bits 5-9
Supervisor Mode 5-11
Timeout Disconnect 5-12
RTS / CTS Handshake 4-4, 5-9
S
Safety Information i
Saving Parameters 9-1 to 9-2, 11-9
Scroll Mode 8-8
Sequence Disconnect 5-11 to 5-12
SET Button 2-1, 4-6
SetUp Switch 8 4-5
SetUp Switches 2-2, 4-2 to 4-6
Show Passwords 7-1, 7-5
Site I.D. Message 5-5
Define 11-7
Display 11-8
Skip / Connect 8-8
Specifications Apx-2
Status Screens 7-1 to 7-6
Stop Bits 5-9
Supervisor Mode 5-11, 8-1
Supervisor Password 5-2, 5-5,
5-11, 11-7
Sure? Prompt 11-1
System Parameters Menu 5-5, 11-7
System SetUp Ports 2-2, 5-2, 5-4
T
Technical Support Apx-3
Terminal Block Assembly 4-1
Terse Response 4-5, 5-13, 11-2
Third Party Connect 8-1 to 8-2
Third Party Disconnect 8-4, 11-6
Three Character Logoff 5-12, 8-3
Timeout Disconnect 5-12, 8-4
U
Upgrade Firmware 10-1 to 10-2
Upload Parameters 9-1 to 9-2
User Mode 8-1
User Password 5-2, 5-4
V
Verbose Response 4-5, 5-13, 11-2
Voltage Selector Switch 4-1
W
Warnings i
Who Command 7-5 to 7-6, 11-10
Wild Card 11-1
X
XON / XOFF Handshake 4-4, 5-9
Index-3
Index