User`s guide

/SD Display Port Diagnostics
Provides more detailed information regarding the operational
status of each port. Note that in User Mode, this screen will only
display parameters for the ports that are allowed by the Port
Password that was entered at log in. For More information on
the Port Diagnostics Screen, please refer to Section 7.2.
Availability: Supervisor / User
Format: /SD [Enter]
Response: Displays Port Diagnostics Screen
/U Save Parameters
Sends APS configuration parameters to an ASCII text file as
described in Section 9.
Availability: Supervisor Only
Format: /U [Enter]
Response: The APS will send a series of command lines.
/UF Upgrade Firmware
When new versions of the APS operating firmware become
available, this command is used to update the existing firmware
as described in Section 10. Note that this command will only
function at the internal modem port (Port 8) and at Setup Ports
One and Two.
Availability: Supervisor Only
Format: /UF [Enter]
Response: The APS will display a menu which offers the
options to retain existing APS parameters, default parameters
or abort the upgrade procedure.
11-9
Command Reference Guide