User`s guide

/J Display Site ID
Displays the user-defined Site I.D. message.
Availability: Supervisor / User
Format: /J [Enter]
Response: Displays Site I.D. Message
/P Set RS232 Port Parameters
Displays a menu which allows the user to select options and
parameters for the selected port. Section 5.5.3 describes the
procedure for defining port parameters.
Availability: Supervisor Only
Format: /P [x] [Enter]
Where x is the number or name of the port to be configured. If
the port number or name is not specified, the APS-8M will
display the configuration menu for your resident port.
Response: The Port Parameters Menu is displayed.
/S Display Port Status
Displays the Port Status Screen, which lists current conditions
and parameters for all ports. Normally, the Port Status Screen
will not display Port Passwords; the Password column will read
either “defined” or “undefined”, depending upon whether or not
the password for each port has been specified. When the
Supervisor Mode is active, the /SP command offers the option to
either display or suppress Port Passwords. In User Mode, the /S
command will only display information for the ports that share
the same password entered at login. For more information on the
Port Status Screen, please refer to Section 7.1.
Availability: Supervisor / User
Format: /S[P] [Enter]
When the “P” option is included (e.g. /SP), the Port Status
Screen will lists the password for each port, if defined.
(Supervisor Mode Only).
Response: Displays Port Status Screen
11-8
APS-8M User’s Guide