User`s guide

11.3. Command Summary
Command Availability
Function Command Syntax Supervisor User
Enter Command Mode [Enter] XX
Exit Command Mode /X [Enter] XX
Help Menu /H [Enter] XX
Display Site ID /J [Enter] XX
Display Port Status /S[P] [Enter] X
ÊË XÊ
Display Port
Diagnostics
/SD [Enter] XÊ XÊ
Display Port
Parameters (Who)
/W[P] [n] [Enter] XË XÌ
Set System
Parameters
/F [Enter] X
Set RS232 Port
Parameters
/P <x> [Enter] X
Copy RS232 Port
Parameters
/CP [Enter] X
Connect /C <x> [x] [Enter] XX
Í
Resident DisconnectÎ ^X XX
Third Party
Disconnect
Ï
/D[/Y] <x> [x] [Enter]
/D[/Y] * [Enter]
X
Erase Buffer /E[/Y] <x> [x] [Enter]
/E[/Y] * [Enter]
X
Default & Test /I[/Y] [Enter] X
Save Parameters /U [Enter] X
Upgrade Firmware /UF [Enter] X
Ê Supervisor Mode displays parameters for all ports; User Mode
only displays parameters for ports allowed by Port Password.
Ë To display Port Passwords, include the “P” Option.
(Supervisor Mode Only).
Ì A port with "User" command capability can only view its own
parameters. A User Port cannot view parameters for other ports.
Í A User Port cannot perform a Third Party Connect.
Î Resident Disconnect: Disconnects your resident port from
another port. Note that the Resident Disconnect Sequence can be
redefined via the Port Configuration Menus.
Ï Third Party Disconnect: Disconnects two or more nonresident
ports. Must be issued from a third port with Supervisor command
capability.
11-3
Command Reference Guide