User`s guide

7.2. The Port Diagnostics Screen (/SD)
The Port Diagnostics Screen provides more detailed information
about each port, including the port name and communication
parameters. To display the Port Diagnostics Screen, access the
command mode and type /SD [Enter], the screen will appear as
shown in Figure 7.2.
Like the Port Status Screen, the Port Diagnostics Screen is also
available to both Supervisors and Users, and will look slightly
different, depending upon whether the command mode was
accessed with the Supervisor Password or a Port Password
(User Mode).
In User Mode, the Port Diagnostics Screen will display only the
status of those ports that share the same Port Password that was
entered at login. Ports that are protected by other passwords will
not be displayed.
7-3
The Status Screens
PORT DIAGNOSTICS: APS-M, Version 2.00, Site ID: (undefined)
PORT | NAME | STATUS | BAUD | COM | HS | MODE | BUF | CTS
-----+------------------+--------+------+-----+-----+------+-----+-----
01+ | (undefined) | *Free | 9600 | 8N1 | RTS | Any | 0 | H
02+ | (undefined) | *Free | 9600 | 8N1 | RTS | Any | 0 | L
03+ | (undefined) | *Free | 9600 | 8N1 | RTS | Any | 0 | L
04+ | (undefined) | *Free | 9600 | 8N1 | RTS | Any | 0 | L
05+ | (undefined) | *Free | 9600 | 8N1 | RTS | Any | 0 | L
06+ | (undefined) | *Free | 9600 | 8N1 | RTS | Any | 0 | L
07+ | (undefined) | *Free | 9600 | 8N1 | RTS | Any | 0 | L
08+ | Internal_Modem | *Free | 9600 | 8N1 | RTS | Modem| 0 | L
Enter /H for Command Menu
Figure 7.2: The Port Diagnostics Screen