User`s guide

As shown in Figure 7.1, The Port Status Screen lists the
following items:
·
Name: The user-defined name for each port.
·
Password: The user-defined password for each port. Note
that actual passwords are not displayed; this column will
read either “undefined” or “defined”. To display Port
Passwords, type /SP [Enter] (Supervisor Mode Only).
·
Status: The connect status of each port. When the port is
connected, this column will list the number of the other APS
port connected to this port.
·
Mode: The user-selected Port Mode. This column will read
Any (Any-to-Any), Modem, Passive, or Buffer, depending
on the configuration selected for the port.
·
Buffer Count: Lists the amount of data (in bytes) stored in
the buffer for this port.
7-2
APS-8M User’s Guide
PORT STATUS: APS-M, Version 2.00, Site ID: (undefined)
PORT | NAME | PASSWORD | STATUS | MODE | BUFFER COUNT
-----+------------------+------------------+--------+------+--------------
01 | (undefined) | (undefined) | Free | Any | 0
02 | (undefined) | (undefined) | Free | Any | 0
03 | (undefined) | (undefined) | Free | Any | 0
04 | (undefined) | (undefined) | Free | Any | 0
05 | (undefined) | (undefined) | Free | Any | 0
06 | (undefined) | (undefined) | Free | Any | 0
07 | (undefined) | (undefined) | Free | Any | 0
08 | Internal_Modem | (undefined) | Free | Modem| 0
Enter /H for Command Menu
Figure 7.1: The Port Status Screen