User`s guide

Command Function/Options
#Ln Select Detection Phase.
* #L0 Negotiates V.42 mode (MNP or LAP-M).
#L1 Enables MNP and disables LAP-M.
#L2 Enables LAP-M and disables MNP.
#L3 Disables detection phase, goes directly
to LAP-M.
&En Error Correction / Flow Control.
&E0 No Error Correction.
* &E1 V.42 Auto-reliable mode.
&E2 V.42 Reliable mode.
&E3 No modem-initiated flow control.
* &E4 CTS/RTS modem-initiated flow control.
&E5 XON/XOFF modem initiated flow control.
* &E6 Disable XON/XOFF pass-through.
&E7 Enable XON/XOFF pass-through.
&E8 Disable Enq/Ack pacing.
&E9 Enable Enq/Ack pacing.
* &E10 Disable Normal Mode flow control.
&E11 Enable Normal Mode flow control.
&E12 Disable pacing.
* &E13 Enable pacing.
&E14 Disable Data Compression.
* &E15 Enable Data Compression.
6-4
APS-8M User’s Guide