User`s guide

5.5. Port Configuration
5.5.1. Configuration Conventions
When responding to prompts, invoking commands, and selecting
items from the port configuration menus, note the following:
·
To select an item from a Port Configuration menu, key in the
number for the item and press [Enter].
·
To clear an item in a Port Configuration menu, enter the
number for the desired item and press [Enter]. When the
prompt appears, press [Space] and then press [Enter].
·
When defining the Port Name, do not use the forward slash
character (/), double quotes ("), the asterisk character (*),
or blank spaces.
·
Port Names cannot begin with a number.
·
Refer to the instructions in each screen for additional
functions available under that screen.
·
To exit a menu or prompt without changing its current value,
press [Esc].
·
Passwords and port names are case sensitive. When defining
passwords and port names, note the exact text, including the
case of each character.
·
If you are configuring the APS-8M unit via modem,
communication parameters will not be changed until after
you exit from command mode and disconnect from the
APS-8M unit.
5-6
APS-8M User’s Guide