User`s guide

9. Access Command Mode via Modem: From a PC with a
modem and telco line, dial the number for the line which
has been connected to the APS-8M's internal modem. Once
the connection is established, the unit should send the
"APS>" command prompt, indicating that you have
successfully accessed the command mode.
a) Type /H and press [Enter] to display the Help Menu.
If desired, you may also wish to repeat the Port
Connection / Disconnection examples described in
Item 7 above.
b) When you have finished communicating with the
APS-8M unit, type /X and press [Enter] to exit the
command mode and terminate the modem connection to
the unit.
This completes the introductory overview of the APS-8M.
Please proceed to Sections 4 and 5 for complete installation and
configuration procedures.
3-4
APS-8M User’s Guide