User`s guide

2.2. Back Panel
¬
Power Cable Receptacle AC powered units only. DC
units include a terminal block assembly as described in
Section 4.1.2.
 Power Switch
® SetUp Switches: A bank of eight DIP switches, which set
default communication parameters and other features.
¯ Internal Modem Port: For connection to your telco line.
For information regarding modem configuration, please
refer to Section 5.5.3.
° RS232 PORTS: For connection to RS232 console ports on
user devices. For more information, please refer to
Section 4.4 (connection instructions), Appendix A
(interface description), and Section 5.2 (Setup Ports).
2-2
APS-8M User’s Guide
Figure 2.2: Instrument Back Panel