User's Manual
Table Of Contents
- Introduction
- Safety Information
- Operation
- Configuration
- Protocols
- Serial Point to Point Operation
- Input Handling
- Output Handling
- WTE Output Control Protocol
- Store Forward Operation
- Installation
- MReX Firmware Upgrade
- Antenna
- Disclaimer
- Manufacturing marking and labels
- Maintenance
- Product End Of Life
- Product Warranty
- Specification
MReX Transceiver User Manual v1.92 Firmware
Product Warranty
WTE Limited products are warranted for a period of 12 months after purchase date against faulty
workmanship or materials. Return the product, all freight paid by the customer and the product will
be repaired or replaced.
The MReX can be damaged through improper handling and system integration. ESD handling pre-
cautions must be observed.
The product warranty will be invalidated through evidence of:
• Unauthorised work carried out.
• Tampering, including evidence of removal of internal electronics from the case.
• Installation in wet or corrosive environments.
• Exposure to impact or excessive vibration.
• Use or installation outside of the specified operating parameters.
• Use in any system or product without the inclusion of ESD or over voltage protection
devices.
© WTE Limited, 2020 – Christchurch New Zealand Page 56 of 59