User Guide

Table Of Contents

- 1 -

Wsdcam Remote For SF03R/SF22R Alarm

User Guide

SF03R

How To Pair With Remote?

1. Take out battery from the paired alarm(s) before going to pair

2. Insert only one battery in the alarm that you’d like to add remote

3. Insert 2nd battery into the alarm while holding the BELL button of the new remote

4. The alarm will beep once. Continue holding the BELL button until the alarm beeps one more

time

5. Release the BELL button and press the ARM button. The alarm will sound "Bi... Bi..."

6. Done (It means you have paired successfully if you heard "Bi..Bi..")

How To Delete Remote?

(Note: All remotes with this alarm will be deleted)

1. Take out battery from alarm(s)

2. Insert only one battery in the alarm that you’d like to delete remote(s)

3. Insert 2nd battery into the alarm while holding the BELL button of remote

4. The alarm will beep once. Continue holding the BELL button until the alarm beeps one more

time

5. Release the BELL button and press the PANIC button. The alarm will sound "Bi... Bi..."

6. Done (It means you have deleted successfully if you heard "Bi..Bi..")

WSDCAM

PAGE 1
Wsdcam Remote For SF03R/SF22R Alarm AM User Guide SF03R WS DC How To Pair With Remote? 1. Take out battery from the paired alarm(s) before going to pair 2. Insert only one battery in the alarm that you’d like to add remote 3. Insert 2nd battery into the alarm while holding the BELL button of the new remote 4. The alarm will beep once. Continue holding the BELL button until the alarm beeps one more time 5. Release the BELL button and press the ARM button. The alarm will sound "Bi... Bi..." 6.
PAGE 2
SF22R AM How To Pair With The First Remote? 1. Remove the battery of the alarm, 30 seconds later install the battery 2. Then long press the Search Function Button(Bell Key) of remote, after the alarm sound “Bi”, press the ARM Button or Disarm Button 3. Alarm will sound “Bi..Bi” to remind the learn code operation successful 4. You can use the remoter now WS DC How To Pair With More Remotes? 1. Press DISARM Button of the first remote to make the alarm in disarm mode 2.