Installation & Assembly

3) Install the tile onto the wall. You do not need to leave
space between the tiles. They can be installed right next
to each other. The adhesive is very strong, once installed
if you do attempt to remove it please note that it might
damage the tile, wall or compromise the adhesive
strength. The tile is not meant to be reused multiple
times.
4) Grouting is optional. You must use un-sanded grout with
a recommended grout joint less than 1/8”. If you choose
to grout, please wait at least 12 hours for the adhesive to
dry before grouting.
If you do not wish to grout, please wait at least 12 hours
before cleaning the tile surface with a damp sponge.
- Grout is not necessary, but if you wish to grout, please follow all grout application instructions.
- If you wish to use a tile sealer, then you must grout before applying tile sealer.
- Peel and Stick Tiles are not reusable, once installed and removed, the adhesive layer will be compromised.
- Peel and Stick Tiles should never be installed on the floor, wet, high moisture areas or outdoor areas.