Instructions / Assembly

Pedestal Sinks Installaon Instrucons
I n s t a l l a t i o n
I n s t r u c t i o n s
M o d e l │
P e d e s t a l S i n k s
Dimensions Metric
1 inch = 2.54 cm
1 inch = 25.4 mm
1051 Lea Drive - Collegeville, PA 19426
Tel. [phone] - Fax [phone]
www.wsbathcollections.com - [e-mail]
Page 9/9
1. Hold the sink up and the pedestal at the
desired installaon locaon. Ensure that the
sink is level, then mark the locaon of the
mounng holes on the back of the sink.
2. Drill pilot holes at the marked locaons of
the sink’s mounng holes.
Installaon Instrucons & Diagrams
3. Insert the anchors into the drilled holes,
screw the mounng hanger bolts.
4. Move the sink back into posion at the in-
stallaon locaon. Lightly secure the sink
with washers and nuts.
5. Proceed to installaon of the drain, trap,
water supply lines, and the sink faucet.
6. Move the pedestal back into posion. Li
the sink up and secure the pedestal under-
neath the sink.
7. Secure sink with washers and nuts. Be care-
ful not to over ghten the bolts to avoid
sink chips and cracks.
8. Complete the installaon by applying a thin
bead of silicone around the back of the sink
where it meets the wall.
6
4
1
5
7
2
3
8