Owner Manual

BASIC OPERATION
1. Rocker switch
a. Turn switch to <–> position; lights can be controlled by the IR sensor.
b. Turn switch to <o> position to turn off the lights.
c. Turn switch to <=> position to turn on the lights.
2. Dimmable IR sensor
a. Turn the Rocker switch to <–> position to activate the IR sensor.
b. Move your hand across the IR sensor to turn the lights on or off.
c. The distance between your hand and the sensor should be approx. 1”.
d. To adjust the brightness of the lights, keep your hand in front of the
sensor until the desirable brightness has reached and move your hand
away from the sensor.
e. If the lights flicker, the level of brightness might be too low; try to
adjust the brightness to a higher level.
5
• IR sensor requires a minimum clearance of 5 1/4”. Light level will
continuously change if there is object too close to the IR sensor.