Owner Manual

INSTALLATION
Insert provided drywall
anchors.
Install the mounting bracket.
Connect to 110V power
supply.
Hang the mirror to the wall and
make sure the bracket in the
back of the mirror lineup with
the mounting bracket properly.
Press the mirror down
slightly and make sure the
brackets fit properly.
3
• Using the wall studs to hang the mirror is highly recommended.
• This mirror is NOT designed to work with dimmable wall switch.
• IR sensor requires a minimum clearance of 5 1/4”.
For drywall installation, mark
the hole locations and drill Φ
6mm holes for the drywall
anchors. Install a junction
box behind the mirror for
power connections.