Owner Manual

Assembly instructions (continued)
3. Assemble the glass tray
□ Slide glass tray (J) , rubber washer (I) and
metal washer (H) over the nipple on top of
the column assembly (K).
□ Pull the excess power cord through bottom
of the column assembly (K).
□ Screw the pole assembly (G) to end of the
nipple to secure the glass tray (J).
NOTE: To prevent breaking the glass
tray (J), do not over tighten the pole (G)
onto the glass tray top (J).
4. Assemble the harp and shade
□ Squeeze legs of the harp (D) together and
insert the two ends between the prongs of
the harp holder.
□ Place the shade (C) onto the harp (D).
□ Secure the shade (C) to harp (D) with
rubber washer (B) and finial (A).
5
G
H
J
Nipple
D
Harp holder
A
C
B
K
I