Assembly & Installation Instrutions

Turn on the power at fuse or circuit box.
8. Pull out the source wires from the outlet box. Make wire connections using wire connectors as follows:
---Connect the smooth-coated wire (marked) from the fixture to the black wire from the power source.
---Connect the ribbed-coated wire (unmarked) from the fixture to the white wire from the power source.
---Attach the fixture grounding wire to the mounting plate with the green grounding screw, and then connect it to
the house grounding wire with a wire connector.
Carefully put the wires back into the outlet box.
9. Attach the canopy to the mounting strap by inserting the top loop, then secure it with the collar.
10. Install four bulbs (not included). Check relamping label at socket area or packaging for maximum allowed wattage.
The following parts are available for re-order if damaged or missing.
Spare Parts List:
Mounting Strap (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Hex Nut (D)
Wire Connector (F)
Nipple (G)
Canopy (H)
Collar (I)
Washer (E)
Top Loop (J)
Loop Lock (K)
Chain (L)
A
B
A: 13-7/8"
B: 20"
Mounting Hardware
(1 SET)
3”Rod
(1PC)
6”Rod
(1PC)
12”Rod
(4PCS)