Assembly & Installation Instrutions

2. Attach the mounting plate to the outlet box by using two mounting screws.
3. Pull out the source wires from the outlex box. Make wire connections using wire connectors as follows:
---Connect the hot wire (usually black insulation) from the fixture to the black wire from the power source.
---Connect the neutral wire (usually white insulation) from the fixture to the white wire from the power source.
---Attach the fixture grounding wire (usually green insulation or bare wire) to the mounting plate with the
green grounding screw, and then connect it to the house grounding wire with the wire connector.
Carefully put the wires back into the outlet box.
4. Attach the back plate to the mounting plate by inserting two fixture mounting screws, and then
secure it with two ball nuts.
5. Attach the glass shades to the glass holders, and then secure them with socket rings.
6. Install bulbs (not included). Check relamping label at socket area or packaging for maximum
allowed wattage.
Turn on the power at fuse or circuit box
The following parts are available for re-order if damaged or missing.
Spare Parts List:
Wire Connector (E)
A: 16"
B: 10-1/8"
C: 7-3/4"
Ball Nut (F)
Lock Nut (G)
Assembly Kit
Glass Shade
(2PCS)
Mounting Plate(A) Fixture Mounting Green Grounding Mounting Screw (D)
Screw (B) Screw (C) (1 SET)