Assembly & Installation Instrutions

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

2. READ AND SAVE THESE INSTRUCTIONS.

Mounting Plate(A) Fixture Mounting Green Grounding Mounting Screw (D) Wire Connector (E) Ball Nut (F) Lock Nut (G)

Screw (B) Screw (C)

Installation Steps

1. Thread two fixture mounting screws through the mounting plate, and then secure them with two lock nuts.

Adjust the length of the fixture mounting screws if necessary.

Note: Make sure that the fixture mounting screws are lined up horizontally to make the fixture level.

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

WARNING:

NOTES: 1. Before installing, consult local electrical codeds for wiring and grounding requirements.

Hardware Package (included):

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

Turn off the power at fuse or circuit box

Outlet Box

Mounting Screw(D)

Green Grounding Screw(C)

Mounting Plate (A)

Glass Shade

Socket Ring

Bulb Type A

Max. 60W

(not included)

Fixture

Glass Holder

Socket

Ball Nut (F)

Wire Connector (E)

Fixture Wire

Back Plate

Lock Nut (G)

House Grounding Wire

Fixture Grounding Wire

Fixture Mounting Screw (B)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF WARNING: POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codeds for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
. Attach the mounting plate to the outlet box by using two mounting screws. 3. Pull out the source wires from the outlex box. Make wire connections using wire connectors as follows: ---Connect the hot wire (usually black insulation) from the fixture to the black wire from the power source. ---Connect the neutral wire (usually white insulation) from the fixture to the white wire from the power source.