Assembly instructions

ManualsBrandsWrought Studio ManualsCeiling LightsBarnstaple 1-Light Single Geometric Pendant

CURVED BLACK METAL WIRE PENDANT LIGHT

ASSEMBLY INSTRUCTIONS

1) Carefully unpack and identify the each part to ensure

you have everything ready for installation. Read all

instructions carefully before starting.

2) Turn o the main electrical supply from the fuse

box or circuit breaker in your house or building.

3) Attach the crossbar (8) to the outlet box (1) with the

two box screws (9) as shown. The side of the crossbar

marked "GND" must face out.

4) Thread the two support screws (11) about 1" into the

pre-drilled holes in the crossbar spaced the same

distance apart as the holes in the canopy (13).

5) To connect xture wires:

① Place the black negative xture wire (5) evenly with the black

supply wire (2) from the outlet box.

② Fix the wire nut connector (4) over the ends of the two wires

and screw the connector clockwise until you feel a rmness.

③Try gently to pull the connector o the wires. lf you can pull

the connector o, carefully re-do the step above, and check

again for a rm connection.

④ Connect the white positive xture wire (6) to the white supply

wire (3) from the outlet box in the same manner as above.

⑤ Separately wrap the wires connections using electrical tape

one inch before the connector and include the connector.

⑥ If your outlet box has a ground wire (7), green or copper only,

attach this wire and the green ground wire (12) from the

xture to the green ground screw (10) by wrapping both

wires under the head of the screw and tighten. If outlet box is

not provided with ground wire, attach only the bare copper

wire from the xture to the green ground screw (10).

⑦ Carefully tuck all wires into ceiling outlet box.

6) Place the xture body to bottom of the outlet box (1), aligning

screws on crossbar with mounting holes in canopy and lock it

securely with the cap nut (14).

7) Install the bulb in the socket of the xture body.

8) Turn on the main power supply to test the light. Save these

instructions for future use.

LED Bulb 10W Max

(6W LED included)

Standard

Type A 40W

max bulb

WARNING: Determine if ceiling and or ceiling joists are strong enough to support the weight of this xture. TURN OFF

ELECTRICITY before beginning installation by switching circuit breaker o. DO NOT connect this xture to an electrical

system that does not provide a means for equipment grounding. All electrical components must be installed by a

certied electrician in accordance with the National Electric Code and the appropriate Local Electrical Codes.

Electrical Tape

(not provided)

Phillips Screwdriver

(not provided)

BULB

BLACK SUPPLY WIRE (2)

BLACK FIXTURE WIRE (5)

GREEN OR COPPER

GROUND WIRE (7)

SCREWS TO CEILING BOX (9)

GREEN GROUND SCREW (10)

GREEN GROUND WIRE (12)

WHITE SUPPLY WIRE (3)

WIRE CONNECTOR (4)

WHITE FIXTURE WIRE (6)

CROSSBAR (8)

SUPPORT SCREWS (11)

CANOPY (13)

CAP NUT (14)

CEILING OUTLET BOX (1)

DO NOT RETURN THIS ITEM TO THE STORE OR CONTACT THE RETAILER.

Please contact our dedicated customer service team torequest parts or assistance with your merchandise.

Summary of content (6 pages)

PAGE 1
CURVED BLACK METAL WIRE PENDANT LIGHT WARNING: Determine if ceiling and or ceiling joists are strong enough to support the weight of this fixture. TURN OFF ELECTRICITY before beginning installation by switching circuit breaker off. DO NOT connect this fixture to an electrical system that does not provide a means for equipment grounding. All electrical components must be installed by a certified electrician in accordance with the National Electric Code and the appropriate Local Electrical Codes.
PAGE 2
IMPORTANT WARRANTY INFORMATION * SAVE THIS INFORMATION FOR FUTURE REFERENCE * Our products are produced under the strict quality control standards and meet or exceed all applicable industry standards and consumer regulations. Your merchandise is warranted for ninety (90) days from the date of purchase against manufacturing defects. In the unlikely event you should have a problem with your merchandise, or you are missing parts, it is not necessary to return the unit to the store where it was purchased.
PAGE 3
LUZ COLGANTE CON CABLEADO METÁLICO NEGRO EN CURVAS ADVERTENCIA: Determine si el techo o las vigas del techo soportarán el peso de este artefacto. DESCONECTE LA ELECTRICIDAD antes de iniciar la instalación desconectando el disyuntor. NO conecte este artefacto a un sistema eléctrico que no cuente con las instalaciones de descarga a tierra correctas.
PAGE 4
IMPORTANT WARRANTY INFORMATION * SAVE THIS INFORMATION FOR FUTURE REFERENCE * Our products are produced under the strict quality control standards and meet or exceed all applicable industry standards and consumer regulations. Your merchandise is warranted for ninety (90) days from the date of purchase against manufacturing defects. In the unlikely event you should have a problem with your merchandise, or you are missing parts, it is not necessary to return the unit to the store where it was purchased.
PAGE 5
SUSPENSION ARRONDIE AVEC ARMATURE MÉTALLIQUE NOIRE ATTENTION : Assurez-vous que le plafond et/ou les solives puissent résister au poids de cet équipement. Avant de commencer le montage,COUPEZ L’ÉLECTRICITÉ depuis le disjoncteur. N’INSTALLEZ PAS cet équipement si votre installation électrique n’est pas reliée à la prise de terre. Tous les composants électriques doivent être installés par un électricien agréé en accord avec les codes électriques locaux et nationaux.
PAGE 6
INFORMACIÓN IMPORTANTE DE GARANTÍA * GUARDE ESTA INFORMACIÓN PARA FUTURA REFERENCIA * Nuestros productos son fabricados con los más estrictos controles y normas de calidad y cumplen o exceden todos los requisitos de rigor de la industria, además de cumplir con todas medidas de protección al consumidor. Su mercancía está garantizada por 90 días desde la fecha de compra contra defectos en su fabricación.