Assembly Instructions

A
A
B
B
CC
D
D
INDUSTRIAL PLUG-IN WALL LAMP
REMOVE ALL PARTS FROM PACKAGE, BE CAREFUL NOT TO DAMAGE ANY COMPONENTS.
Measure area and determine desired mounting height.
Install mounting bracket [A] to wall.
Remove shade screws [C] from socket [B].
Install bulb 60W max (included).
Install the shade [D] onto socket part [B] and tighten by
using shade screws [C].
Slide fixture onto mounting bracket [A].
Plug in fixture. Use toggle switch to turn fixture on and
off
1.
3.
2.
4.
5.
6.
7.
Note: Turn off switch before replacing the bulb. Make sure the bulb has sufficient time to cool down.
Do not subject the lamp to any shock while lit as shattering of glass shade may result.
C
x3