Installation & Assembly

ManualsBrandsWrought Studio ManualsLightingDucote LED Swing Arm Lamp

INSTALLATION INSTRUCTIONS

(TO INSTALL AS A PORTABLE UNIT)

WARNING ! S HUT PO W ER OFF AT FUSE OR CIR CU IT BRE AK E R.

AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.

Fig. 1

WARNING

 Risk of shock, do not plug in the unit before

assembly is complete.

 Do not exceed the maximum wattage rating. (NE

PAS DEPASSER LA PUISSANCE NOMINALE

MAXIMALE!)

 Before you begin assembly of your new fixture,

please follow the instruction manual step by step.

MOUNTING THE LUMINAIRE, PLUG VERSION (Fig.1)

For hardware version see Fig.2 & Fig.3

1. Carefully unpack your new fixture and lay out all the

parts on a clear area. Take care not to lose any small

parts necessary for installation.

2. Drill two holes in the proper position onto the wall

according to the mounting location of the fixture.

3. Secure the mounting plate (A-1) to the wall using

screws (N) and plastic anchors (B) provided.

4. Place the fixture body (K) over the mounting plate

(A-1) and secure with screws (C).

5. Install the bracket (G) with the wood screws (H) and

Anchors (L) to the wall, fix the cord (I) into the bracket

(G) and snap the cord cover (J) over the bracket (G)

tightly.

6. Use suction cup (F) to install 1*50W MR16 Bulb (E)

(Included) into the shade (D) (DO NOT EXCEED THE

MAXIMUM WATTAGE RATING!) (NE PAS DEPASSER

LA PUISSANCE NOMINALE MAXIMALE!)

IMPORTANT SAFETY INSTRUCTIONS

Lighted lamp is HOT!

WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, EXPOSURE TO EXCESSIVE UV RADIATION,

OR INJURY TO PRESONS:

WARNING: In handling of halogen bulb, care should be taken not to touch it with your bare hands. Oil residue will

shorten the life of the halogen bulb. If you accidentally come in contact, wipe thoroughly with a clean, lint-free, cotton cloth.

Allow the bulb to cool for 10 minutes before changing the bulb.

1. Turn off/unplug and allow to cool before replacing the bulb.

2. Bulb gets HOT quickly! Only contact switch/plug when turning on.

3. Do not touch hot lens, guard, or enclosure.

4. Do not remain in light if skin feels warm.

5. Do not look directly at lighted lamp.

6. Keep lamp away from materials that may burn.

7. Use only with a 50 watt or smaller bulb.

8. Do not touch the bulb at any time. Use a soft cloth. Oil from skin may damage the bulb.

9. Do not operate the portable luminaries with a missing or damaged guard, lamp containment barrier, or UV filter.

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to

reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not

fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with

an extension cord unless plug can be fully inserted. Do not alter the plug.

Page 1/2

A-1

Summary of content (2 pages)

PAGE 1
INSTALLATION INSTRUCTIONS (TO INSTALL AS A PORTABLE UNIT) WARNING ! S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E A K E R . AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR. WARNING  Risk of shock, do not plug in the unit before assembly is complete.  Do not exceed the maximum wattage rating. (NE PAS DEPASSER MAXIMALE!)  LA PUISSANCE Fig. 1 D NOMINALE E Before you begin assembly of your new fixture, please follow the instruction manual step by step.
PAGE 2
INSTALLATION INSTRUCTIONS (TO INSTALL AS A FIXTURE UNIT) WARNING ! S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E A K E R . AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR. MOUNTING THE FIXTURE, HARDWIRE VERSION (Fig.2 & Fig. 2 Fig.3) 1. Shut off power at the circuit breaker and remove the old fixture including the mounting hardware. 2. Carefully remove the fixture from the carton and check that all parts are included as shown in the illustration. 3.