Assembly Instruction

Installation

Step 1

Unpack all parts from cartons carefully.

1. Fix the mounting bracket(B) to the outlet box

with machine screw(C).

Attach the Canopy(G) to the Mounting bracket

(B) and fix it by turning the screwed ball (E).

Step 2 Wire connection

Make wire connections, with wire connectors(D), following the reference chart listed below.

Connect,Hot,Black or Red outlet Supply Wire to: Connect,Neutral,White Outlet Supply Wire to:

Black White

*Parallel Cord(round&smooth) *Parallel Cord(square&ridged)

Clear,Brown,Gold or Black without Tracer(colored stripes) Clear,Brwn,Gold or Black without Tracer(colored stripes)

Insulated Wire(not green)with copper metal conductor Insulated Wire(not green)with Silver metal conductor

*Note: When parallel wire(SPTI&SPTII)is used. The neutral wire is square shaped and

ridged and the hot wire will be round in shape and smooth.(See illustration on left)

Grounding Instructions:

a) For installation in the United States: Wrap ground wire from outlet box around green

ground screw on mounting bracket, no less than 2" from wire end. Tighten ground screw. If

fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.

b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire

around green grounding screw on mounting bracket. Tighten ground screw.

Step 3

Open the cover on the bottom of the metal

cage(J),then Install bulbs(H). then close the

cover of the metal cage.Be sure to use light

bulb(s) with wattage no greater than specified

on this fixture. Always make sure that electrical

current is turned off before changing bulbs.

PLEASUE USE TYPE"A" BULB MAX 60-WATT OR EDISON

BULBE MAX 60-WATT OR CFL BULB MAX 13-WATT

OR LED MAX 9-WATT

THERE IS 1PC LED BULB 4-WATT IN THE BOX.

Step 4

Consult a qualified electrician to ensure correct branch

circuit conductor

ENJOY YOUR LAMP

2 / 2