Assembly Instructions

REMOVE ALL PARTS FROM PACKAGE, BE CAREFUL NOT TO DAMAGE ANY COMPONENTS.
1.
3.
Measure area and determine desired hanging height.
Product comes with two (2) sets of three (3) 12”, one (1)
8” and one (1) 4” hard stems [A] for adjustable hanging
height. Determine the stems
you will use to achieve
desired height. Threads are removable from the stems
and thread removal may make it easier to thread wire.
Thread wire [E] from frame [B] through one side only of
the light fixture through the first stem [A]. Continue to add
stems on that side, threading the wire and screwing each
stem together and repeat as necessary to achieve desired
hanging height.
On non - wire side, continue to add stems, screwing each
stem together. Repeat as necessary to achieve desired
hanging height.
Detach mounting plate [C] from canopy [D].
Locate two (2) canopy stem connectors [G]. Remove nut
[H], lock washer [I] and washer [J] from both connectors.
Screw the finished side of the canopy stem connector [G]
into stem assembly on each side, threading wire through
the connector on the appropriate side.
Thread wire [E] through canopy [D] on one side.
Place canopy holes over stem assembly threads. Place
washer [J], then lock washer [I] over thread. Secure with
nut [H]. Be sure to thread wire through washers and nut
on wired side. Repeat on second side.
Install bulbs 60W max (included).
2.
4.
5.
6.
7.
8.
9.
10.
Note: Turn off switch before replacing a bulb. Make sure the bulb has sufficient time to cool down.
A
x2
B
C
E
x2
F
D
x2
G
I
J
H
G
H
I
J
H
I
J
A
E
B
A
G
D
A
A
G
4 LIGHT KITCHEN ISLAND PENDANT CHANDELIER
Install light to ceiling. We recommend installation by a
qualified electrical professional. Canopy screws [F] are
used to tighten light to ceiling.