Assembly Instructions

ASSEMBLY INSTRUCTIONS
1. CAREFULLY UNPACK AND PLACE ALL PARTS ON A SMOOTH
SURFACE AND LAY THEM UP AS PER THE SKETCH.
2. AT`TACH THE LOWER DIFFUSER (1) TO THE FIXTURE (1) AND TIGHTEN IT BY SCREWS (3).
3. INSTALL THE LIGHTING BULB (4).
4. ADJUST THE HEIGHT OF THE NUT OF THE THREAD (5) AND SCREW IT INTO THE BODY.
5. ALIGN THE FABRIC SHADE (6) TO THE FIXTURE AND THE UPPER DIFFUSER (7)
TIGHT IT WITH RING (8).
6. INSERT THE PLUG INTO OUTLET,
TURN ON THE SWITCH AND ENJOY YOUR LAMP.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
USE 60 WATTAGE (MAXIMUM) TYPE
A BULB (BULB NOT INCLUDED)