WARNING!! Furniture Tipping Risk. Serious risk of severe or fatal crush injuries can occur from furniture tipping over if not secured. Children like to climb on furniture and Unsecured furniture can pose a serious danger. Please follow all instructions and install the tip-over restraints provided. In addition to installing the restraints, to help prevent tip-over: 1. Unless specifically designed to accommodate, do not set TV’ s or other heavy objects on top of this product. 2.
Caution : You must read this before you proceed MULTI-FUNCTIONAL CABINET Label Picture Description QTY A Top Panel 1 B Left Side Panel 1 C Right Side Panel 1 Noble House Home Furnishings LLC Page 2 OF 16
D Center Panel 1 E Middle Panel 1 F Shelf Panel 2 G Left Door Panel 1 H Right Door Panel 1 I Back Panel 1 J Bottom Panel 1 K Knob Handle 2 L Metal Leg 4 Noble House Home Furnishings LLC Page 3 OF 16
Label Picture Description QTY ① Cam Lock 11 ② Cam Bolt 11 ③ Cam Cap 11 ④ Positioning Dowel (8*30mm) 17 ⑤ Cap Wood Screw (6*50mm) 7 ⑥ Screw (4*32mm) 3 ⑦ Screw (3*16mm) 29 ⑧ Nail 31 ⑨ Metal Shelf Support 9 ⑩ Allen Key 1 ⑪ Connector 4 ⑫ Screwdriver (not provided) 1 ⑬ Hammer (not provided) 1 ⑭ Power Drill (not provided) 1 Noble House Home Furnishings LLC Page 4 OF 16
Cabinet Restraint Device Hardware ⑮ Metal Bracket 4 ⑯ Wall Plug 2 ⑰ Wall Plug Screw 2 ⑱ Pan Head Screw 2 ⑲ Cabinet Restraint Strap 2 Before Beginning Assembly: X 11 X 17 X 29 X 11 X 11 X7 X3 X 31 X9 X1 X4 X1 X1 X1 X2 X2 X4 Noble House Home Furnishings LLC Page 5 OF 16
Overview Top Panel (A) Center Panel (D) Right Side Panel (C) Left Side Panel (B) Shelf Panel (F) Back Panel (I) Middle Panel (E) Right Door Panel (H) Left Door Panel (G) Bottom Panel (J) Metal Leg (L) FRONT FACING Knob Handle (K) This Multi-Functional Cabinet has multiple parts and may require up to 60 minutes to assemble. To give you an overview of the MultiFunctional Cabinet parts, the above picture is to help you put the various parts into perspective.
Step 2 2.3 2.1 ① 2.2 ⑫ ② ④ ⑫ ④ ④ ① ① ② B ④ ② ④ ⑫ ① ② ④ ② C ④ ① ④ ④ 2.1) Insert Cam Locks(①) into mounting positions on Left Side Panel(B) by hand. 2.2) Insert Positioning Dowel(④) into mounting positions on Left Side Panel(B) by hand. 2.3) Attach Cam Bolts(②) to mounting positions on Left Side Panel(B) with Screwdriver(⑫). 2.4) Repeat the same process on the Right Side Panel(C). Step 3 3.1 3.2 ① ④ ④ ① ④ ④ D ① ④ 3.
4.1) Insert Cam Locks(①) into mounting positions on Middle Panel(E) by hand. 4.2) Insert Positioning Dowel(④) into mounting positions on Middle Panel(E) by hand. Step 5 H G K ⑥ ⑥ ⑥ ⑫ ⑫ Attach Knob Handles(K) to Left Door Panel(G) and Right Door Panel(H) using Screws(⑥) with Screwdriver(⑫). Tighten the Screws fully in a sequential manner. Note: There are pre-existing mounting positions on Left Door Panel(G) and Right Door Panel(H) to attach the Knob Handles(K).
Step 7 7.1 ④ Arrow ① 7.2 ① ⑫ ① E B ② NOTE ④ ② Cam Bolt Mounting Position 7.3 7.1) Insert Positioning Dowels(④) from Middle Panel(E) into mounting positions on Left Side Panel(B). Note: Ensure the arrows on Cam Locks head points towards the Cam Bolt mounting positions. 7.2) Insert the mounting positions on side of Middle Panel(E) onto Cam Bolts(②) on Left Side Panel(B). 7.3) Turn the Cam Locks(①) clockwise with the Screwdriver(⑫) until they all lock into place. Step 8 8.1 ④ Arrow E 8.
Step 9 9.1 ④ D ⑤ E ⑤ 9.2 ⑤ ⑩ 9.1) Insert Positioning Dowels(④) from Center Panel(D) into mounting positions on Middle Panel(E). 9.2) Attach Center Panel(D) to Middle Panel(E) using Cap Wood Screw(⑤) with Allen Key(⑩). Step 10 10.2 ① ② A ⑫ D 10.1 B 10.3 Arrow ① NOTE ① C ④ ④ ② Cam Bolt Mounting Position 10.1) Insert Positioning Dowels(④) from Left Side Panel(B), Right Side Panel(C) and Center Panel(D) into mounting positions on Top Panel(A).
.1) Insert Positioning Dowels(④) from Left Side Panel(B) and Right Side Panel(C) into mounting positions on Bottom Panel(J). 11.2) Attach Bottom Panel(J) to Cabinet Assembly using Cap Wood Screw(⑤) with Allen Key(⑩). Step 12 ③ ① ③ ③ ③ ③ ③ ③ ③ ③ ③ ③ Attach Cam Caps(③) to all Cam Locks(①) by hand. Step 13 CAUTION ⑬ I I ⑧ No ⑧ ⑧ ⑧ Flip the whole Cabinet over. Attach Back Panel(I) to Cabinet Assembly using Nails(⑧) with Hammer(⑬).
Step 15 15.2 ⑦ 15.1 ⑪ 15.3 ⑫ ⑪ B ⑫ ⑪ ⑦ C ⑪ G ⑪ ⑪ H ⑫ ⑪ 15.1) Attach Connectors(⑪) to Left Side Panel(B) and Right Side Panel(C) using Screws(⑦) with Screwdriver(⑫). Tighten the Screws fully in a sequential manner. 15.2) Rotate first screw on Connectors(⑪) to adjust left-right position of Left Door Panel(G) and Right Door Panel(H) when necessary. 15.3) Rotate second screw on Connectors(⑪) to adjust in-out position of Left Door Panel(G) and Right Door Panel(H) when necessary.
Put Shelf Panels(F) in place on Metal Shelf Supports(⑨). ！ WARNING Serious or fatal crushing injuries can occur from tipping furniture. To help prevent tip-over: ALWAYS secure this furniture to the wall using Cabinet Restraint Device. See product instructions for more ways to help prevent furniture tip-over. Usage For Cabinet Restraint Device: To secure Multi-Functional Cabinet against wall, attach two Metal Brackets(⑮) on wall and product, use Cabinet Restraint Strap(⑲) to connect the Metal Brackets(⑮).
Step 19 19.2 19.1 ⑯ ⑯⑯ ⑬ ⑭ 19.1) Drill two holes on wall at same height as Metal Brackets(⑮) on Multi-Functional Cabinet with Power Drill(⑭). You can mark these points in two ways as below: 1) Move the Multi-Functional Cabinet back to the wall. Mark two points same height as Multi-Functional Cabinet on the wall. Note: The Metal Brackets need to be secured to solid, load bearing surface. Please use a Stud Finder(not supplied) if needed to locate the Wall Frame.
Move Multi-Functional Cabinet to the wall. Pull the Restraint Straps(⑲) through the Metal Brackets(⑮) on the wall and Multi-Functional Cabinet one by one, and pull the Restraint Straps(⑲) tight. Step 22 Your Multi-Functional Cabinet is ready for use. This Multi-Functional Cabinet can only be used on a flat, level surface.
Noble House Home Furnishings LLC Page 16 OF 16
