ASSEMBLY INSTRUCTIONS End Table ASSEMBLY 2-Person Amicably Tone Tools Required REQUIREMENTS Assembly Antoinette) {Not Provided) Philips Screwdriver Thank you for purchasing our product! Please refer and use this assembly instruction to assemble the product. Contact our customer service department in case there are any missing or damage pairs or hardware. We appreciate your business! ASSEMBLY PREPARATION 1. Remove all packaging materials, staples and packing straps from the carton. 2.
ASSEMBLY INSTRUCTIONS End Table PARTS LIST Part # & Description Oy {1} Half-Leg Section 1 {2} Half -Lag Section 2 {3} Leg 2 {4} Table Top 9 HARDWARE LIST 3cm Zom & fom I Ocm LJ 3 pes ipo 4 pes Screw 8X12mm Allen Key Screw 4x16mm A B C STEP 1 51 @ Join Half-Leg Sections (1 & 2) using Screw (A) as shown. (Note: for part (1) insert screws into first 2 holes closest to the horizontal end.) Use Allen Key (B) to drive screws. Tighten screws completely when both screws are in place.
ASSEMBLY INSTRUCTIONS Coffee Table STEP 3 #) Lay the Table Top (4} bottom-side up on a material that does not damage its surface. b) Position leg assembly completed in STEP 2 to align screw holes on brackets on sate leg to the screw holes on (4). ยข) Usa a Phillips Screwdriver to drive Screw {C) to fasten legs to able. Do nof lighten screws completely until ali 4 screws are in place. STEP 4 Turn the table upright. The assembly of the coffee table is complete.
