Owner Manual

7
Care and Cleaning
□ Clean the light fixture with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
Possible Cause
□ The bulb is burned out.
□ The power is off.
□ There is a faulty wire connection.
□ The circuit breaker is off.
□ There is an exposed wire.
□ There are too many items on
one circuit.
□ Discontinue use of the light
fixture.
□
□ Unplug other items on the circuit.
□ Ensure that the circuit breaker
is set in the on position.
□ Check the wiring.
□ Ensure that the power supply is
turned on.
□ Replace the light bulb.
Solution
The bulb will not light.
The fuse blows or a
circuit breaker trips when
the light is turned on.
Problem
Installation (continued)
3 Hanging the light fixture
□ Push all excess wires into the outlet box.
□ Raise the canopy (A) to the ceiling and secure
in place by screwing the two finials (FF) to the
nipples of the mounting screws.
4 Installing the bulb
□ Install the 60-watt max. medium-base type A
bulb (E) (not included) in the socket of the light
fixture.