Installation & Assembly

Assembly Instructions (English)
ASSEMBLY INSTRUCTION FOR
Floor Lamp
Floor LampFloor Lamp
1. Screw the pole (B) onto base (A) clockwise until tight, and
screw poles (B), (C), and (D) together. You may need to pull
any excess cord gently through the poles so that these two
parts fit.
2. Screw in light bulbs before applying shade(E).
3. Unscrew pre-assembled finial ( F ) from upper lamp pole
(D).
4. Put shade (E) onto the upper lamp pole（D), screw on
finial (F) until tight.
5. Tighten the metal buckle (H) onto pole(C) with screw (G).
Use metal metal buckle (H) to secure the shade (F) to the
pole.
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
---------------------------------------------------------------
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug as a feature to reduce
the risk of electric shock (one blade is larger than the other).
This plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician.Do not use with an
extension cord unless the plug can be fully inserted. DO
NOT ALTER THE PLUG .
-------------------------------------------------------
BULB TYPE: Use only with maximum of 3*60 watt
incandescent bulbs (bulbs not included).
PARTS DIAGRAM
(1) * finial (F) 1* metal buckle (H)
Floor Lamp