PRODUCT NAME: 3LT Wall Sconce Please consult your electrician for Hang fixture and wiring. Caution;Xenon Bulbs get very hot and may burn you. Always meek sure bulbs are off for a minimum of 10 minutes before handling. Fixture may be dimmed using an electronic low voltage dimmer.
IMPORTANT : Turn off power at the main fuse or circuit breaker box before starting installation EER (B) Support screw (A)Bracket (C)Body Locate all hardware & components before discarding packaging Step. 1: Remove mounting bracket (A) from fixture and install to electrical box. ) neutral Appositive 2.) Green wire) Step. 2: Wire fixture to wires in outlet box. Copper/Green wire is for Ground. 3.) Step. 3: Install fixture to bracket(4) and tighten ball nuts (B) on the back plate to secure.
IMPORTANT : Turn off power at the main fuse or circuit breaker box before starting installation i (D)Bulb (E)Glass Locate all hardware & components before discarding packaging c Step. 4: Install the fixture, and put the the socket. Cleaning & Care: Clean with soft cloth and a mild detergent. Do not use abrasive cleaner.
