Assembly Instruction Sheet

2of2
STEP 6 Install the Fixture-
A. Carefully tuck all wires into the outlet box and position the Ceiling
Canopy (D) over the outlet box. Align the holes in the Ceiling
Canopy (D) with the mounting screws, then attach the Ceiling
Canopy (D) using the previously removed mounting balls. Hand
tighten until snug.
Figure 5
STEP 7 Install Bulbs and Adjust Rings-
A. Insert bulbs onto sockets and screw snugly into place.
B. The innermost ring is the fixed ring. Rotate other rings to achieve
your desired locations.
Your fixture is now assembled and ready to use. Enjoy!
Bulb (not
supplied)
Socket
Figure 7
STEP 5 - Wire Connections
A. Wrap bare or green ground wire around green ground screw on the
crossbar, no less than 2 inches from the end of the wire. Tighten the
green ground screw.
B. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
Green Ground Screw
on the Crossbar
White wire
from outlet box
White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from Fixture
Mounting Screw
Mounting Ball
A
D
ROTATE
ROTATE
ROTATE
Fixed Ring
Fixed Ring
Figure 6
NOTE: ALL DIMENSIONS ARE ROUNDED UP
TO THE NEAREST 1/4"
5” Dia.
73.25” OVERALL
HEIGHT INCLUDES
(2) 6” AND (2) 12” RODS
24”
35”
21”
22”
23”
24”
FINISH: WESTERN BRONZE
Thank you for purchasing a product.