Installation & Assembly

STEP 1: Unpack all the parts and classify them
according to the illustration shown. Place the parts
on a scratch free surface.
STEP 2: Drill 2 holes in a proper position of the wall,
put bolts in it, using wooden screws to secure the
mounting bar to the wall.
STEP 3: Make sure the power is turned off at the wall
outlet box where the xture is to be installed. Secure
the mounting bar to the wall junction box using the
mounting screws.
STEP 4: Use the wire connection to connect the
positive and neutral wires. Connect the ground wire
to the junction box ground port.
STEP 5: Secure the xture to the mounting bar using
the nials.
STEP 6: Fix the body to the back plate using the
mounting screws.
STEP 7: Turn on the power at fuse or circuit box.
CAUTION:
To reduce the risk of re, use the specied lamp wattage (or smaller) and bulb type identied on the product.
CLEANING INSTRUCTIONS:
Do not use polish or cleaners on your product. Just wipe clean with a soft cloth.
CAUTION – RISK OF FIRE
This product requires installation by a qualied electrician. Before installing be sure to read all instructions
and TURN THE POWER TO THE ELECTRICAL JUNCTION BOX OFF.
Outlet Box Screw
Mounting Screw
Outlet Box
Black Wire Connectiion
Universal Circle Cross Bar
Ground Screw
Body
Bolt
Screw
Wooden Screw
Wire Housing
Finial
White Wire Connection
ASSEMBLY AND MOUNTING INSTRUCTIONS
PLEASE READ THE ASSEMBLY INSTRUCTION SHEET CAREFULLY BEFORE PROCEEDING. Carefully unpack
and identify all parts prior to building the unit. Each part is identied on the drawing for reference.
DO NOT DISCARD THE ORIGINAL PACKAGING. If after careful inspection, you must return the item for any
reason. Please repack the unit using the original carton and inserts.