User Manual

6.4.1 Replacing the Drive Belt

• Stop engine and remove the key and wait for all moving parts to stop.

• Remove deck covers.

• Remove cutter deck engine to blade belt from clutch.

• Raise front of unit and secure

• Remove the clutch stop

• Remove belt by using a ½” ratchet and extension to relieve belt tension.

• Reinstall in reverse order. Figure shows belt configuration.

NOTE: Ensure clutch stop is reinstalled.

6.4.2 Replacing the Cutter Deck Belts

• Stop engine and remove the key and wait for all moving parts to stop.

• Remove deck covers

• Remove belt by using a ½” ratchet and extension to relieve belt tension.

• Reinstall in reverse order. Figure shows belt routing and spring compression direction.